103 Isolation Exercises for Your Whole Body

Whether you’re looking to maximize muscle gains or improve your body composition and health, resistance exercise is essential to meeting your goals.

While compound exercises work multiple muscle groups at a time, isolation exercises seek to stimulate only one muscle group in an effort to provide muscle growth.

Though it’s best to include a combination of compound and isolation exercises in your fitness routine, this comprehensive list covers 103 isolation exercises for your whole body, including how to perform them.

If you’re unsure whether an exercise fits your experience level or concerned about an underlying injury or health condition, it’s best to discuss your training plan with a qualified trainer.

Goblet squatShare on PinterestFelix Hug/Stocksy United

Legs: quads

The quadriceps, often referred to as quads, are the muscle group that comprises the front portion of your thigh.

These muscles mainly serve to allow extension (straightening) of the knee joint.

This group is made up of four muscles — the vastus lateralis, vastus intermedius, vastus medialis, and rectus femoris.

These muscles are best stimulated by leg-pushing movements.

1. High bar squats

While squats are technically a compound movement, placing the bar a bit higher on your back and narrowing your stance a little can serve to efficiently isolate the quads.

How to perform

2. Leg press

The leg press serves as a great alternative to squats — not only for those just beginning their training journey but also advanced trainees.

Just like with squats, keeping your stance a bit narrower will help activate your quads.

How to perform

3. Front squat

With the front squat, the bar is placed just above the clavicle, which moves the center of gravity forward and makes the quads the prime mover for this exercise.

How to perform (alternate grip)

4. Bulgarian split squat

While the split squat targets multiple muscle groups, it does a great job of hitting the quads.

The movement is performed by putting one foot up on a flat bench behind you and squatting down with the forward leg. You can hold a dumbbell in each hand for added difficulty.

It can also be performed with a loaded barbell or Smith machine as you become more advanced.

How to perform

5. Hack squat

The hack squat is essentially the opposite of the leg press.

Instead of pushing against a weighted platform, you’re pushing against weighted pads that lie on your shoulders.

Just as with the leg press and squat, keeping your stance narrow will help better isolate the quads.

How to perform

6. Leg extension

The leg extension is the gold standard for quad isolation exercises, as there’s minimal involvement of any other muscle groups.

Most machines utilize a weighted pad that’s placed against your lower shin and pushed against to activate the quads.

How to perform

7. Goblet squat

The goblet squat is another squat variation in which a kettlebell or dumbbell is held out in front of the body as you squat down.

To better stimulate the quads, you can place a 2.5-pound (1-kg) or 5-pound (2.5-kg) plate under your heel and keep your stance a bit narrower.

How to perform

Legs: hamstrings

The hamstrings are another major muscle group located on the backside of your legs.

These muscles serve to flex the leg at the knee joint and also assist in extending the hips.

They’re made up of three main muscles — the semitendinosus, semimembranosus, and biceps femoris.

These muscles are best stimulated by pulling and hip hinging movements.

8. Leg curl

The leg curl tends to be the gold standard when it comes to hamstring isolation exercises.

While there are several variations, this movement uses a weighted pad that is placed just below the calf muscles and curled in toward your legs.

How to perform (seated or lying)

9. Romanian deadlift

While the Romanian deadlift stimulates some other muscle groups, the primary movers are the hamstrings.

For this movement, a weighted barbell or dumbbells are held in your hands as you bend at the hips with a slight bend at the knees, providing an excellent stretch for the hamstrings.

How to perform (dumbbell version)

10. Glute ham raise

The glute ham raise is a unique piece of equipment that’s becoming more popular in training facilities throughout the world.

When performed properly, it can efficiently isolate the hamstrings and glutes to provide maximum muscle activation and growth.

How to perform

11. Single-leg deadlift

The single-leg deadlift most commonly uses either a kettlebell or dumbbell held in the opposite hand of the hamstring you’re targeting.

The weight is then lowered toward the floor while bending at the hips, allowing your non-working leg to track straight back and serving as a great stretch for the working hamstring.

The exercise is performed on each side until the desired numbers of reps and sets are reached.

How to perform

12. Resistance band leg curl

The band leg curl is a great alternative when you don’t have access to a leg curl machine.

For this movement, the band is secured to an anchor point.

Next, lie on your stomach while wrapping the band just below your calf muscle. Curl it up toward your hamstring and slowly return to the starting position.

How to perform

Legs: glutes

The glutes, which are scientifically referred to as the gluteus maximus and gluteus medius, make up a large part of your posterior leg musculature.

These large and powerful muscles are responsible for the extension and lateral rotation of the hip joint.

They’re best isolated with hip hinging and thrusting movements.

13. Barbell hip thrust

The barbell hip thrust is one of the best exercises for stimulating the glutes.

A loaded barbell, usually with padding, is positioned over the hips with your back braced against a low flat bench.

A hip thrusting motion is then performed for the desired number of reps and sets.

How to perform

14. Dumbbell or barbell walking lunge

While the walking lunge stimulates multiple muscle groups, it can be an excellent exercise for working the glutes.

Place either a loaded barbell on your back or dumbbells in your hands and perform a repetitive lunging motion while you pay close attention to muscle contraction of the glutes.

How to perform the dumbbell version (barbell version)

15. Cable pull-through

The cable pull-through is a unique alternative to the hip thrust when equipment isn’t available or you feel like switching things up.

A rope attachment is fixed to a low cable. With your back facing the weight stack, grasp the rope in your hands between your legs.

Resting your hands on your thighs, thrust the weight while paying close attention to the contraction of the glutes.

How to perform

16. Machine glute kickback

The glute kickback is a readily available piece of equipment in most gyms and can be a fantastic choice for working the glutes.

How to perform

17. Glute bridge

While the glute bridge requires some flexibility, no equipment is needed, so it can be performed at home.

The movement is started by lying down with your feet flat and perpendicular to the floor.

A thrusting motion is then performed to contract the glutes for the desired amount of reps.

How to perform

Legs: calves

The calves are an important muscle group located on the back of your lower leg.

They comprise two major muscles called the gastrocnemius and soleus.

They’re mainly responsible for plantar flexion, which refers to the extension of the foot down away from the body, such as when jumping or running.

18. Seated calf raise

The seated calf raise is one of the more common movements utilized to work the calves.

Due to the angle at the knee while the movement is performed, it predominantly targets the soleus muscle.

How to perform (without machine)

19. Standing calf raise

The standing calf raise serves as a good complement to the seated calf raise.

Given that this movement hits the calves with the legs relatively straight, it mainly targets the gastrocnemius muscle.

How to perform (without machine)

20. Stair calf raise

The stair calf raise is a unique movement that can be performed anywhere you have access to stairs.

The movement is performed similarly to a standing calf raise, extending your feet at the ankle joint and allowing your ankle to go below the surface of the step to get a good contraction.

How to perform (single leg)

21. Smith machine calf raise

The Smith machine calf raise is similar to a standing calf raise, although the resistance is provided by a loaded Smith machine bar on your back.

It’s helpful to perform the movement with your toes on a step platform, which allows your heels to track down to get a full range of motion with each rep.

How to perform

Back

Share on PinterestCavan Images/Offset Images

The back comprises numerous muscles, both big and small, though the major muscles include the lats (latissimus dorsi), traps (trapezius), and erector spinae (lower back).

These muscles are responsible for the movement of your spine, stabilizing the trunk, and coordinating the movement of your limbs.

What’s unique about the back is that it’s best trained from different angles to maximize muscle gains.

Back: vertical movements

22. Pullup or assisted pullup

The pullup is a classic back exercise. When it’s performed correctly, it can recruit most of the back muscles.

While there are different variations, the standard pullup starts by hanging from a bar with a medium width grip and pulling your body up with your back muscles until your chin is just above the bar.

How to perform (assisted)

23. Lat pulldown

The lat pulldown is another bread-and-butter back movement.

This movement mimics the motion of a pullup and is an excellent alternative, as the weight can be adjusted to match your level of strength and experience.

How to perform

24. Straight arm pulldown

The straight arm pulldown is a fantastic back isolation movement that provides a nice stretch at the top.

This movement is performed similarly to a tricep pushdown, but the arms are kept straight, focusing on contracting the lats.

How to perform

25. Hammer strength high row

This is a unique machine exercise that’s widely available in gyms.

The movement is similar to that of a lat pulldown, but the individual handles allow for increased variation and even make it possible to perform the movement with one arm at a time.

How to perform

Back: horizontal movements

26. Bent over row

The bent over row is another classic back exercise that’s excellent for adding back thickness.

The exercise is performed by starting with a loaded barbell or dumbbells in your hands, bending slightly at the hips and knees, and rowing the weight up toward your belly button.

How to perform with a barbell (dumbbell)

27. Inverted row

The inverted row is an excellent horizontal pulling exercise for hitting the mid-back.

It’s best performed on a Smith machine set in a lower position, although if the movement is too difficult, you can raise the bar a bit to make it easier.

How to perform

28. Seated cable row

The seated cable row is a classic horizontal back movement for building thickness and size.

Make sure you keep an upright posture and get a full stretch at the end of each rep for maximal muscle stimulation.

How to perform

29. Incline dumbbell row

The incline dumbbell row is another alternative to the chest supported row machine.

An incline bench is set at a 30–45-degree angle. You then sit on the bench backward with your chest facing the pad. Finally, you grasp a pair of dumbbells and row them up just until your upper arm is perpendicular to the pad.

How to perform

Lower back

30. Good morning

The good morning is a classic strength and conditioning exercise for building lower back strength, though it also hits the hamstrings and glutes to a good degree.

It’s important to perform this movement with good form to reduce the risk of injury.

How to perform

31. Back extension

The back extension is a widely available piece of equipment that’s great for targeting the lower back.

As you become more advanced, you can hold a weight plate or dumbbell in your hand to make the exercise a bit more difficult.

How to perform

32. Superman

The superman requires no equipment and can be performed in the comfort of your own home.

It’s an excellent exercise for targeting the posterior muscles, including the lower back.

If you find it too difficult to raise both arms and legs at the same time, try alternating by first raising your left arm and right leg and then your right arm and left leg.

How to perform (alternating Superman)

33. Bird dogs

Bird dogs are another tried-and-true exercise for strengthening the core.

Also requiring no equipment, they’re a great addition to a home workout program.

How to perform

Back: traps

34. Dumbbell shrug

The dumbbell shrug is similar to the barbell shrug but allows for increased variation during the movement by utilizing a dumbbell in each hand.

How to perform

35. Machine shrug

The machine shrug is a plate–loaded option that allows for efficient isolation of the traps.

How to perform

36. Seated dumbbell shrug

Seated dumbbell shrugs are an excellent way to eliminate the other muscles of the trunk and fully isolate the traps.

They also reduce spinal stress, and therefore, may be a better option for those recovering from injury.

How to perform

Chest

Share on PinterestCarrastock/Getty Images

The chest comprises two major muscles called the pectoralis major and pectoralis minor.

The pectoralis major is split into two parts called the clavicular head, which is the upper chest, and the sternocostal head, which is the lower portion of the chest.

The main function of the chest muscles is to bring the arms toward the center of the body, also known as adduction.

Chest: incline movements

37. Incline barbell bench press

The incline barbell bench press is the gold standard for building upper chest mass.

A barbell is loaded on an incline bench, slowly unracked, and pressed with a controlled movement, getting a full stretch at the bottom and peak contraction at the top.

How to perform

38. Incline dumbbell bench press

The incline dumbbell bench press involves a movement pattern similar to that of the previous exercise, but dumbbells are used instead of a barbell.

This allows for more shoulder flexibility and may lead to better muscle contraction for some trainees.

How to perform

39. Smith machine incline bench press

The Smith machine bench press utilizes a loaded Smith machine bar for resistance and can be performed either flat or on an incline.

This method allows you to isolate the chest muscles by reducing the amount of stabilization needed by accessory muscles.

How to perform

40. Incline dumbbell fly

The incline dumbbell fly is an excellent upper chest accessory exercise, as it allows for a full stretch at the bottom of the movement.

Perform this movement on an adjustable bench set at a slight incline.

Grasp a pair of dumbbells in your hands, and while lying on your back, extend your arms down with a slight bend in the elbows, allowing for a full stretch before returning to the starting position.

How to perform

41. Cable incline fly

The cable incline fly is similar to the dumbbell incline fly, but a cable crossover machine is used for resistance.

An incline bench is set up inside a cable crossover, and loaded handles are brought together in a slow and controlled manner, allowing for a full contraction of the upper chest.

How to perform

Chest: flat movements

42. Barbell bench press

The flat barbell bench press is a bread-and-butter movement for chest building that uses a loaded barbell set up on a flat bench for resistance.

It’s performed by grasping the bar with a medium width grip, unracking the bar, lowering it to your mid-chest with a controlled motion, and pressing up to return it to the starting position.

How to perform

43. Dumbbell bench press

The dumbbell bench press involves a movement similar to that of the barbell bench press, but it uses dumbbells for resistance.

This allows a greater range of motion resulting in improved isolation of the chest muscles.

How to perform

44. Machine bench press

The machine bench press seeks to mimic the movement pattern of the traditional bench press but reduces the amount of stabilization required by other muscle groups, which allows for better isolation of the chest.

How to perform

45. Dumbbell fly

The dumbbell fly is quite similar to the incline dumbbell fly but uses a flat bench instead of an incline bench.

This better targets the lower portion of your chest muscle.

How to perform

46. Machine chest fly

The machine chest fly uses the same movement pattern as the dumbbell chest fly but provides a more even strength curve, meaning the resistance is more consistent throughout the exercise.

How to perform

47. Cable fly

The cable fly is unique in that it allows for greater flexibility in the angle at which the exercise is performed.

Setting the cables a bit lower will target the upper pecs, while setting the cables slightly higher will hit the lower part of your chest muscles.

How to perform

48. Pushup

The pushup is a classic bodyweight chest exercise that can be a great addition to your home workout program.

The arms can be placed a bit wider to target the pecs, or slightly closer to hit the triceps.

How to perform

Shoulders

Share on PinterestSouth_Agency/Getty Images

The shoulder muscles, also known as the deltoids, are made up of three distinct heads — the anterior head or front delts, lateral head or side delts, and posterior head or rear delts.

The main function of the deltoids is to provide abduction at the shoulder joint, meaning moving the upper arm away and out to the side of your body.

The exercises are broken into three categories based on the specific head of the delts that they target.

Shoulders: front delts

49. Standing shoulder press

The standing shoulder press is a classic movement for building shoulder mass, particularly for the front delts.

This movement is performed by unracking a loaded barbell and pressing it over your head in a controlled motion.

How to perform

50. Standing dumbbell shoulder press

The standing dumbbell shoulder press mimics the movement of the barbell press but uses dumbbells for resistance.

This allows for greater variability and may help eliminate the wrist discomfort that some people experience with barbells.

How to perform

51. Seated barbell shoulder press

The seated barbell shoulder press is quite similar to the standing version, although it relieves some of the trunk muscle from stabilizing the body, allowing for more isolation of the delts.

How to perform

52. Seated dumbbell shoulder press

The seated dumbbell shoulder press is a well-known bodybuilding movement for building shoulder mass.

This movement is performed on an incline bench set to a nearly upright position.

Dumbbells are then pressed above the head in a controlled motion for the desired number of reps.

How to perform

53. Machine shoulder press

The machine shoulder press follows a movement pattern similar to those of other shoulder-pressing movements but uses an adjustable weight stack for resistance.

Less stabilization is required than is with free-weight shoulder-press exercises, making this a great option for beginners.

How to perform

54. Smith machine seated shoulder press

The Smith Machine seated shoulder press is similar to the seated barbell shoulder press, but the bar is fixed on the Smith Machine.

Just like the machine shoulder press, this reduces the amount of stabilization required, making the movement slightly easier to perform.

How to perform

55. Barbell front raise

The barbell front raise efficiently targets the anterior or front delts.

For this movement, a loaded barbell is grasped with an overhand grip and raised to eye level before steadily being returned to the starting position.

How to perform

56. Dumbbell front raise

The dumbbell front raise is quite similar to the barbell front raise but uses dumbbells for resistance, allowing slightly more variation.

How to perform

Shoulders: side delts

57. Dumbbell lateral raise

The dumbbell lateral raise is one of the more popular exercise selections when looking to hit the side delts.

To perform this movement, a dumbbell is held in each hand and raised out to the side of your body with a slight bend in your elbows. The dumbbells are then returned to the starting position in a controlled motion.

How to perform

58. Cable lateral raise

The cable lateral raise — like other cable movements — provides a steady resistance curve throughout the movement.

This exercise uses a low pulley set up with a single D handle and an appropriate amount of weight.

How to perform

59. Barbell upright row

The barbell upright row is an excellent mass builder for the delts when performed correctly.

A loaded barbell is grasped with a medium overhand grip and pulled directly upward until your hands reach chest or shoulder height. The weight is then returned to the starting position in a controlled manner.

How to perform

60. Cable upright row

The cable upright row is performed in a similar fashion to the previous exercise but uses a straight bar attachment on a cable pulley for consistent resistance throughout the movement.

How to perform

61. Dumbbell upright row

The dumbbell upright row provides a bit more variation than the barbell upright row.

It’s a great option for those who experience wrist pain when doing the traditional barbell upright row.

How to perform

Shoulders: rear delts

62. Cable face pull

The cable face pull directly hits the rear delts when performed properly.

To perform this movement, set up a cable pulley with a rope attachment at eye level.

Pull the rope toward your face while flaring your elbows out to the side, ensuring a full contraction and full stretch during each rep.

How to perform

63. Seated cable face pull

The seated face pull is the same a the traditional face pull but seated.

This takes out some of the required trunk stabilization, making the movement slightly easier and allowing you to fully focus on the muscle contraction.

How to perform

64. Banded face pulls

Banded face pulls follow the same movement pattern as other face pulls but use a band for resistance.

These are a great option for workouts taking place at home or in gyms with limited equipment.

How to perform

65. Dumbbell rear delt lateral raise

The dumbbell rear delt lateral raise is a favorite exercise among bodybuilders looking to target their rear delts.

This movement is performed similarly to a dumbbell lateral raise, but instead of standing straight up, you’re bent over at the waist with a slight bend in the knees, targeting the rear delts.

How to perform

66. Rear delt machine fly

The rear delt machine fly is a commonly found piece of equipment in most gyms.

To perform this movement, sit down facing the chest pad of the machine and making sure the machine arms are adjusted for the rear delt fly.

Grab the handles, and with a slight bend in the elbows, extend your arms back until they’re straight out from your torso, or go back further if comfortable, then finally return your arms to the starting position.

How to perform

Arms

Share on PinterestSouth_Agency/Getty Images

The arms comprise a few major muscle groups, including the biceps and the triceps, which make up the musculature of the upper arm, as well as several smaller muscles that make up the forearm.

The biceps serve to flex the elbow and facilitate pulling movements, whereas the triceps main function is to extend the elbow joint and perform pushing movements.

Meanwhile, the muscles in the forearm facilitate movements of the wrist and hands.

The isolation exercises below are broken up into three groups — biceps, triceps, and forearms.

Arms: biceps

67. Barbell curl

The barbell curl is a classic movement utilized by bodybuilders and recreational athletes alike.

To perform the movement, a loaded barbell is grasped with an underhand grip and curled up toward the shoulders while keeping the upper arms parallel to the torso.

The weight is then lowered back down in a controlled motion to get a full stretch at the bottom.

How to perform

68. EZ Bar curl

The EZ bar curl is another popular exercise for bicep mass building, and it’s performed similarly to the barbell curl.

The curved bar helps relieve some of the pressure on the wrist joint, making the movement slightly more comfortable to perform than with a barbell.

How to perform

69. Alternating dumbbell curl

The alternating dumbbell curl is performed with a pair of dumbbells, one in each hand.

They’re then curled up, one at a time, and slowly lowered to the starting position.

One benefit to this movement is that while one arm is being exercised, the other is at rest, allowing a slight period of recovery between reps.

How to perform

70. Two-arm dumbbell curl

The two-arm dumbbell curl is similar to the previous movement but instead of alternating arms, you’ll complete the exercise by curling both arms up at once.

How to perform

71. Hammer curl

The hammer curl is a slight variation of the two-arm dumbbell curl, but instead of using an underhand grip, the dumbbells are held with a neutral grip, meaning your hands face each other.

This targets the forearms to a greater extent, as well as the biceps.

How to perform

72. Cable curl

The cable curl is an excellent exercise for isolating the biceps, as it provides constant tension throughout the movement.

The exercise is performed by setting up a low pulley with a straight or EZ curl bar.

The bar is then curled up similarly to a barbell curl, making sure to get a peak contraction at the top and a full stretch at the bottom.

How to perform

73. Incline dumbbell curl

The incline dumbbell curl is a seated variation of the traditional dumbbell curl.

This movement utilizes an incline bench set at an approximately 45-degree angle to help further isolate the biceps.

While seated, a dumbbell is held in each hand and curled up in an alternating fashion before slowly being lowered back down to the starting position.

How to perform

74. Dumbbell spider curl

The spider curl is a unique exercise that serves to stimulate a maximal stretch of the biceps at the bottom of the movement.

To perform this exercise, you’ll face backward on an incline bench with your arms hanging down over top with a dumbbell in each hand.

The dumbbells are then curled all the way up, and in a controlled motion, lowered back down, feeling a full stretch at the bottom.

How to perform

75. Preacher curl

The preacher curl is another bread-and-butter bicep-building movement.

For this exercise, a preacher curl bench is utilized.

With the elbows positioned on the pad, an EZ curl bar or pair of dumbbells are grasped with an underhand grip, curled up, and lowered back down with a steady motion.

How to perform

76. Machine preacher curl

The machine preacher curl is similar to the traditional preacher curl but instead of an EZ curl bar or dumbbells, a weight arm is used for resistance.

How to perform

77. Drag curls

Drag curls are a unique variation of the traditional barbell curl.

The difference is that instead of curling the bar up and out, the bar is held close to your torso all the way to the top of the movement and while releasing it back down.

How to perform

78. Band curls

Band curls are an excellent curl option for an at-home workout, or even to try something different at the gym.

While standing on top of the middle of the band as an anchor, the band handles are grasped with an underhand grip and curled up, then back down, resisting the band tension throughout the movement.

How to perform

Arms: triceps

79. Cable pushdown

The cable pushdown is a staple in many exercise programs for its ability to efficiently isolate the triceps.

This movement is performed on a high cable pulley, most commonly with a straight bar attachment.

Facing the pulley and grasping the bar with an overhand grip, the bar is pushed down until just before it reaches your thighs and slowly returned to the starting position, keeping your arms close to your sides.

How to perform (rope attachment)

80. Cable overhead triceps extension

The cable overhead extension hits the triceps from a different angle, promoting well-rounded growth throughout.

To start, set the cable pulley to about chest height with your choice of rope or straight bar attachment.

Grasp the bar with an overhand grip and your back facing the cable pulley, extend your arms up and over your head, pause briefly at the top, and steadily return to the starting position, getting a full stretch at the bottom.

How to perform (rope attachment)

81. Barbell skull crusher

The barbell skull crusher is a classic mass-building movement for the triceps.

To perform this movement, set up a flat bench and load a barbell or EZ curl bar with your working weight.

Lie on the bench, extend the loaded bar over your head, and slowly lower the bar down toward your eyes or forehead, feeling a deep stretch at the bottom and returning the bar to the starting position in a controlled fashion.

How to perform

82. Dumbbell skull crusher

The dumbbell skull crusher is performed similarly to the barbell skull crusher, but dumbbells are used, allowing for more flexibility at the wrists.

How to perform

83. Dips

Dips are an excellent bodyweight triceps exercise that also targets the upper chest to a limited extent.

To perform this movement, stand facing a dip station or parallel bars.

Grasp the bars with your hands facing each other and raise yourself up by pushing with your triceps, then lower yourself down with a controlled motion, feeling a stretch at the bottom.

Finally, raise yourself back up, ensuring a full muscle contraction at the top.

This movement can also be performed with assistance, which uses a counterweight to make it slightly easier.

How to perform

84. Machine dips

Machine dips mimic the movement of traditional dips but use a weighted arm for resistance.

In addition, this exercise is usually performed seated, allowing you to further isolate the triceps.

How to perform

85. Machine triceps extension

The machine triceps extension is a widely available piece of equipment in most gyms.

While seated, place your elbows on the pad and grasp the machine handles.

Extend your arms down, getting a full muscle contraction at the bottom, and slowly return them up to the starting position, feeling a stretch at the top.

How to perform (alternative)

86. Seated EZ bar triceps extension

The seated EZ bar extension is a free-weight version of the cable tricep extension.

While seated, a loaded EZ curl bar is positioned behind the head and extended up, fully contracting the triceps at the top, and lowering it back down to get a full stretch at the end of the movement.

How to perform

87. Dumbbell kickbacks

Dumbbell kickbacks are a great finisher exercise for the triceps.

To perform this exercise, grasp an appropriate dumbbell in one hand, placing the other hand and one knee on a flat bench.

With a flat back, extend the dumbbell up and back using only your tricep muscle, then slowly return it to the starting position.

How to perform

88. Band tricep pushdowns

Band pushdowns are an excellent at-home option for hitting the triceps.

This exercise is similar to a cable triceps pushdown, but a band attached to an anchor point is used to provide resistance.

How to perform

89. Band tricep extension

The band tricep extension follows the same movement pattern as the cable overhead extension but uses a band for resistance, providing constant tension throughout the movement.

How to perform

Arms: forearms

90. Barbell wrist curls

The barbell wrist curl isolates the inside of the forearm that faces your body when standing.

To perform this movement, grasp an empty or lightly loaded barbell with an overhand grip and curl it up toward your body, keeping your arms straight and moving only your wrists.

How to perform

91. Cable wrist curls

The cable wrist curl is performed in the same fashion as the dumbbell wrist curl, though resistance is provided by a low cable pulley.

How to perform

92. Wrist roller

The wrist roller is a fantastic forearm builder that can be made at home.

A wooden dowel or metal bar is affixed with a rope, and a small weight is added to the other end.

Grasping the bar or dowel with an overhand grip, your arms are extended out in front of you.

Reel in the rope by spinning the bar, focusing on working the muscles of the forearm, then reverse the motion, letting the rope back out until it touches the floor.

How to perform

93. Dumbbell bench wrist curls

To perform the dumbbell wrist curl, start by kneeling down facing a flat bench.

Grasp a light dumbbell and allow your hand and wrist to hang over the side of the bench.

Curl the weight up, using only your forearm and getting a full contraction at the top.

How to perform

Abs

Share on PinterestCasarsa Guru/Getty Images

The abs are made up of two main muscle groups — the rectus abdominus and the obliques.

The ab muscles play an important role in stabilizing your core and providing movement of the torso.

These exercises target the abs from a variety of angles, ensuring full isolation.

94. Reaching situp

The reaching situp puts a spin on the traditional situp by having you extend your arms and reach a bit further at the top of the movement, providing a maximal muscle contraction.

How to perform

95. Rope crunch

The rope crunch is a unique ab exercise that uses a cable weight stack for resistance.

To perform this movement, set up a cable pulley with a rope attachment set to medium height.

Facing the weight stack, kneel down and grab the ropes in each hand.

Crunch down, ensuring you get a full contraction at the bottom and deep stretch at the top.

How to perform

96. V–up

The V-up takes the traditional crunch and adds a step to make it a bit more challenging.

To perform this exercise, lie on your back with your legs straight out.

Initiate a crunching motion by raising your legs up and reaching toward your toes in a simultaneous motion, and steadily return to the starting position.

How to perform

97. Machine crunch

The machine crunch is an alternative to the traditional crunch. It’s performed in a seated position as opposed to lying on your back.

To perform the movement, select your desired working weight, and while seated in the machine, reach up to grab the handles.

Perform a crunching motion by contracting your abs, then slowly return to the starting position, getting a full stretch at the top.

How to perform

98. Decline situp

The decline situp is performed on a decline bench, taking the traditional situp and making it much more challenging for maximal ab isolation.

How to perform

99. Hanging leg raise

To perform the hanging leg raise, start by hanging from a pullup bar.

Raise your legs up as high as possible while keeping them relatively straight, then slowly lower them back down to the hanging position.

This movement can also be performed with the knees bent to make it a bit easier.

How to perform (knees bent)

100. Ab roller

The ab roller is a commonly found piece of gym equipment that can be used to build significant ab strength.

To perform this movement, start on your hands and knees with the ab roller in your hands.

Slowly roll the ab roller out until your arms are fully extended, then gradually return to the starting position.

How to perform

101. Russian twist

The Russian twist is a unique exercise that works both the rectus abdominus and obliques.

To start the movement, sit on the floor with a medicine ball or dumbbell in your hands.

Raise your legs and twist back and forth, moving the weight from one side of your body to the other for the designated time or reps.

How to perform

102. Plank

The plank is a static ab exercise usually completed for a set amount of time.

To perform a plank, lie on a yoga mat with your elbows supporting your body and legs extended straight back behind you.

Hold this position for the desired amount of time, usually 15–30 seconds is a good place to start.

How to perform

103. Side plank

The side plank is similar to the traditional plank, though for this movement, you’re turned to your side, supporting your body with one arm and isolating the oblique muscles.

How to perform

The bottom line

Though compound movements may be viewed as superior given that they simulate multiple muscle groups at once, isolation exercises are an equally important part of any strength training program.

To create a balanced training program, it’s best to incorporate a variety of exercises for each muscle group, including a mix of compound and isolation movements.

As always, it’s important to speak with your medical provider before starting an exercise program, especially if you have any underlying conditions.

If you’re unsure about how to tailor your training program to your experience level and needs, consider enlisting the help of a personal trainer.